Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por jmorri04

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the screw cover located on the bottom of the zune.
[* black] Stick small flat head screw driver in one side of dock screw cover and ease up. Do the same on the other side
[* black] *Warningicon_caution] Warning: This is a brittle piece of plastic that will break if forced.
[* blackred] There should be two screws of size 2.6 mm on the bottom of the Zune.
[* black] *Warningicon_caution] Warning: This is a brittle piece of plastic that will break if forced.
[* blackred] There should be two screws of size 2.6 mm on the bottom of the Zune.