Saltar al contenido principal

Cambios al paso #1

Editado por Patrick Swaney

Edicion aprobada por Patrick Swaney

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Back up the memory to an external drive and power off the laptop before starting.
-[* red] Remove the six 5.0 mm Phillips screws using the Phillips Head 1 bit and magnetic driver.
-[* orange] Remove the two 5.0 mm Phillips screws on the back side of the laptop.
+[* red] Remove the six 5.0 mm Phillips #1 using the magnetic driver.
+[* orange] Remove the two 5.0 mm Phillips #1 on the back side of the laptop.