Saltar al contenido principal

Cambios a Paso #1

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

[* red] Remove the pieces of yellow kapton tape from the bottom left corner of the display.
[* orange] Peel the three green antenna ground straps off the copper tape along the bottom edge of the LCD.
[* icon_caution] The adhesive connecting these straps to the display is very strong. An edged tool is helpful to separate the adhesive while you peel the straps off.
[* yellow] Remove the piece of tape securing the camera cable to the LCD.

Imagen 2

Ninguna imagen anterior