Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Dan

Edicion aprobada por Dan

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully insert the new SSD into the adapter, using the length of old drive as a reference for when the SSD is fully in the adapter. The lengths should be the same.
[* black] Insert the SSD and the adapter into the Socket, pushing inward in a straight fashion.
[* black] When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.
[* icon_caution] NVMe Drives can cause kernel panics due to sleep /hibernatio issues. This can be turned off with the following command.
[* icon_note] From a Terminal, use the following command to disable hibernation: ----"sudo pmset -a hibernatemode 0" ---- If you later want to enable hibernation, use: "sudo pmset -a hibernatemode 3"