Saltar al contenido principal

Cambios al paso #6

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* icon_note] In the next few steps you will separate the LCD from the adhesive applied to the upper and lower edges of the LCD relief machined into the front bezel.
+[* icon_caution] The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the metal strip on the LCD.
+[* black] Use the flat end of a spudger to gently lift one of the top corners of the LCD out of the front bezel.