Saltar al contenido principal

Cambios al paso #1

Editado por Brett Hartt

Edicion aprobada por Brett Hartt

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
-[* black] Place the iOpener in the microwave and microwave it for ***one minute*** on the highest power setting.
+[* black] Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
[* icon_reminder] Place the iOpener over the front facing camera on the front edge of the top of the display.