Repara tus cosas Comunidad Tienda

Cambios al paso #3

Editado por Akash Kedia —

Edicion aprobada por Akash Kedia

Antes
Después
Sin cambios

Líneas de Paso

[* red] Disconnect the white and black wires attached to the WLAN card by pulling them away from the card.
-[* icon_note] You can use the nylon spudger to pull a wire off by placing it between the curved wire and gently pulling.
+[* icon_note] You can use the nylon spudger to disconnect a wire by placing it between the curved part of the wire and gently pulling.
[* icon_reminder] When attaching the wires to the WLAN card, place the wire head directly above the connectors and apply pressure to the head to reconnect it.