Paso Dell Latitude E7440 CMOS Battery Replacement Historial #4

Cambios al paso #4

Editado por Akash Kedia — 19 de feb. de 2019

Edicion aprobada por Akash Kedia

	[* black] Separate the wrapped battery stack from the body by pulling up the wire.
	[* icon_note] You may need to use the flat end of the nylon spudger to separate the battery.
	[* icon_note] The stack is attached using glue, so you might hear a pop when removing it.
-	[* icon_reminder] Reapplying an adhesive ~~may be~~ necessary to keep ~~a replacement battery~~ in place.
+	[* icon_reminder] Reapplying an adhesive to the bottom of the battery is recommended, although not necessary, to keep it in place.