Cambios al paso #4
Editado por Akash Kedia —
Edicion aprobada por Akash Kedia
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Separate the wrapped battery stack from the body by pulling up the wire. |
|---|---|
| + | [* icon_note] You may need to use the flat end of the nylon spudger to separate the battery. |
| + | [* icon_note] The stack is attached using glue, so you might hear a pop when removing it. |
| + | [* icon_reminder] Reapplying an adhesive may be necessary to keep a replacement battery in place. |
Imagen 1
Ninguna imagen anterior
Añadido