Saltar al contenido principal

Changes to Step #4

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] Be very careful when performing this procedure! If you put too much pressure on the display, you risk cracking it.
[* black] Wedge a PSPplastic opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.
[* black] Slide the PSPplastic opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.
[* black] Wedge a PSPplastic opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.
[* black] Slide the PSPplastic opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.
[* black] Rotate the display 180 degrees and free the bottom side of the display in the same manner.