Skip to main content

Changes to Step #4

Editado por Miroslav Djuric

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* icon_caution] Be very careful when performing this procedure! If you put too much pressure on the display, you risk cracking it.
[* black] Wedge an iPod opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.
[* black] Slide the iPod opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.
[* black] Rotate the display 180 degrees and free the bottom side of the display in the same manner.

Imagen 1

No hay imagen previa

Añadida

Imagen 2

No hay imagen previa

Añadida