Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Andrew Optimus Goldheart —

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Wedge a PSPplastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the PSPplastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* black] Wedge a PSPplastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the PSPplastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* icon_caution] The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.