Menú

Tus configuraciones

Cambios al paso #2

Editado por David Hodson —

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Wedge an iPoda PSP opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the iPodPSP opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* black] Wedge an iPoda PSP opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the iPodPSP opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* icon_caution] The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.