Cambios al paso #2
Líneas de Paso
| [title] Bottom case | |
| - | [* black] Close the lid and flip the machine over. |
| + | [* black] Turn off the machine, close the lid, and flip it over so it's laying upside down, hinge away from you. |
| + | [* icon_note] Recommend a soft anti-static surface for this so as to not scratch the exterior. |
| [* black] Remove the ten (10) torx screws around the edges of the case. | |
| [* black] Flip up the magnetic "lid" that says "Precision 5530" to expose the service tag and two Phillips screws. Remove these. | |
| + | [* black] Starting from the hinge side, slowly lift the rear case off. There are a few snaps, this is normal. There are no cables attached, so when it comes free, put it off to the side. |