Saltar al contenido principal

Cambios a Paso #5

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] After you unscrew the ten 1mm T5 Torx screws which hold down the motherboard, you will have to removeRemove two additional 1mm T5 Torx screws using the T5 Torx screwdriver. These screws, along with one more on the motherboard, work to holdholding down a black wire which is connected to the motherboard.
[* light_blueorange] Remove a small piece of black electrical tape attached to the wire.
[* red] After you unscrew the ten 1mm T5 Torx screws which hold down the motherboard, you will have to removeRemove two additional 1mm T5 Torx screws using the T5 Torx screwdriver. These screws, along with one more on the motherboard, work to holdholding down a black wire which is connected to the motherboard.
[* light_blueorange] Remove a small piece of black electrical tape attached to the wire.

Imagen 1

Versión Antigua

Nueva Versión