Saltar al contenido principal

Changes to Step #3

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Borrada
Añadida
Sin cambios

Step Lines

[* red] Remove the tape covering the metal shield as shown in the imageshield.
[* orange] Remove the 12 screws marked by the red circles from the image using the Phillips 00#00 screwdriver.
[* icon_note] Make sure not to strip the screws.
[* red] Remove the tape covering the metal shield as shown in the imageshield.
[* orange] Remove the 12 screws marked by the red circles from the image using the Phillips 00#00 screwdriver.
[* icon_note] Make sure not to strip the screws.
[* black] Dislodge the shield by pulling the prongs away from underneath the battery. The shield should come completely off.