Saltar al contenido principal

Changes to Step #3

Editado por Jonathon Cronin

Edicion aprobada por Jonathon Cronin

Borrada
Añadida
Sin cambios

Step Lines

[* orangered] Remove the tape covering the metal shield as shown in the image.
[* redorange] Remove the 12 screws marked in redby the red circles from the imageimage using the Phillips 00 screwdriver.
[* icon_note] Make sure not to strip the screws
.
[* orangered] Remove the tape covering the metal shield as shown in the image.
[* redorange] Remove the 12 screws marked in redby the red circles from the imageimage using the Phillips 00 screwdriver.
[* icon_note] Make sure not to strip the screws
.
[* black] Dislodge the shield by pulling the prongs away from underneath the battery. The shield should come completely off.

Imagen 1

Versión antigua

Nueva versión

Imagen 2

Versión antigua

Nueva versión

Imagen 3

Versión antigua

Nueva versión