Skip to main content

Changes to Step #2

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Borrada
Añadida
Sin cambios

Step Lines

[* blackred] Using the 00 Phillips screwdriver remove the two screws in the corners shown in the imagecorners.
[* blackred] Using the 00 Phillips screwdriver remove the two screws in the corners shown in the imagecorners.
[* black] Using your left hand pull at the exposed section of the PC while simultaneously pushing the right with the thumb of your other hand. This will release the plastic clips allowing back cover to slide off, as shown from the picture
[* icon_caution] When removing the back cover make sure that the ribbon connectors going to the screen are not damaged. Carefully fold over the cover like a book.