Saltar al contenido principal

Changes to Step #2

Editado por Jonathon Cronin

Edicion aprobada por Jonathon Cronin

Sin cambios

Step Lines

[* black] Using the 00 Phillips screwdriver remove the two screws in the corners shown in the image.
[* black] Using your left hand pull at the exposed section of the PC while simultaneously pushing the right with the thumb of your other hand. This will release the plastic clips allowing back cover to slide off, as shown from the picture
[* black] When removing the back cover make sure that the ribbon connectors going to the screen are not damage. Carefully fold over the cover like a hinge.