Saltar al contenido principal

Cambios a Paso #2

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] There are 2 screws at each end of the phone, useUse the T5 star head screwdriver, included in the iFixit toolkit,Torx screwdriver to remove the screws
[* black] Put the
four screws in a safe spot where you will not lose them as they are vital to reassemblyeach corner.
[* orange] Make sure to take out any SD cards, located on the left side of the phone, and SD coversphone before proceeding to the next stepstep.
[* black] After all is removed you may pry off the front of the phone. Use the plastic opening tool to pry the front of the device off. Fully go around the front with the pryplastic opening tool before attempting to pull it offoff.
[* red] There are 2 screws at each end of the phone, useUse the T5 star head screwdriver, included in the iFixit toolkit,Torx screwdriver to remove the screws
[* black] Put the
four screws in a safe spot where you will not lose them as they are vital to reassemblyeach corner.
[* orange] Make sure to take out any SD cards, located on the left side of the phone, and SD coversphone before proceeding to the next stepstep.
[* black] After all is removed you may pry off the front of the phone. Use the plastic opening tool to pry the front of the device off. Fully go around the front with the pryplastic opening tool before attempting to pull it offoff.