Saltar al contenido principal

Cambios a Paso #7

Editado por cory pritchard

Edicion aprobada por cory pritchard

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Plug in solder iron, allow 2-4 minutes to come to temperature.
[* black] Apply solder iron to each speaker terminal, and melt connection.
[* black] When connection is melted, use tweezers to remove defective speaker from the motherboard.
[* icon_note] Solder cools quickly, so the connections will solidify without heat.
[* icon_caution] Avoid dripping, adding, or removing solder to prevent short circuitry.

Imagen 1

Ninguna imagen anterior

Añadido