Saltar al contenido principal

Cambios a este Paso

Editado por Raghda Al-Hmeyrat

Edicion aprobada por Raghda Al-Hmeyrat

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the drone on its back, with the runners facing upward.
[* black] Using the size PH00 Phillips screwdriver head, unscrew the four 2mm screws that connect the runners and camera to the main drone body.
[* black] Pull the runners and camera away from the main drone body.
[* black] Use a spudger for extra leverage if the parts do not easily separate.
[* black] Be careful when separating the runners and camera away from the main drone body - the plastic is brittle and may snap.