Saltar al contenido principal

Cambios a Paso #4

Editado por Debra Crawford

Edicion aprobada por Debra Crawford

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] UsingTurn the size PH00 Phillips screwdriver head, removedrone over so the 2mm screw from the base of the propeller blademotherboard is facing upward.
[* black] PullDisconnect the propeller blade upward to separate itblack and blue camera wires from the drone arm.
[* black] Repeat this process for
motherboard. You may need to use a pointed metal pick to loosen the red putty that holds the four remaining propellersconnectors together.
[* black] UsingTurn the size PH00 Phillips screwdriver head, removedrone over so the 2mm screw from the base of the propeller blademotherboard is facing upward.
[* black] PullDisconnect the propeller blade upward to separate itblack and blue camera wires from the drone arm.
[* black] Repeat this process for
motherboard. You may need to use a pointed metal pick to loosen the red putty that holds the four remaining propellersconnectors together.

Imagen 1

Eliminado

Imagen 2

Eliminado