Saltar al contenido principal

Cambios a Paso #1

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the drone on its back, with the runners facing upward.
[* red] Using the Phillips #00 screwdriver, unscrew the single 2mm screw located on the drone body which connects the headlamp and wiring to the center of the drone frame.
[* red] Using the Phillips #00 screwdriver, unscrew the single 2mm screw located on the drone body which connects the headlamp and wiring to the center of the drone frame.