Saltar al contenido principal

Cambios a Paso #3

Editado por Danny Amado

Edicion aprobada por Danny Amado

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the 6 mm screws around the edges with the Philips head screw driver. Then remove the 6mm screw holding the disc drive into place.
[* orange] Sliding out the disc drive will reveal the final two 4 mm screws on the bottom of the device.
[* red] Remove the 6 mm screws around the edges with the Philips head screw driver. Then remove the 6mm screw holding the disc drive into place.
[* orange] Sliding out the disc drive will reveal the final two 4 mm screws on the bottom of the device.