Saltar al contenido principal

Cambios a Paso #1

Editado por Marty Rippens

Edicion aprobada por Marty Rippens

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] This is the back of the device and where you will begin to take it apart.
[* black] It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
[* black] Use the Flat 1.5 screw drivera metal spudger to pop up the corner of the silver piece.
[* black] Use the Flat 1.5 screw drivera metal spudger to pop up the corner of the silver piece.
[* black] Use the plastic opening tools to pry along the edges of the silver piece.
[* black] Lift up the silver piece to reveal the rest of the back cover.