Saltar al contenido principal

Cambios al paso #7

Editado por Andrew Keyes

Edicion aprobada por Andrew Keyes

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] You will need a Phillips screwdriver and the jimmy for this step.
[* black] Remove the screws shown.
[* icon_note] ''Image Two''
[* black] Remove the screws shown.
[* black] Flip the laptop right side up and open the lid.
[* icon_note] ''Image Three''
[* black] Insert the jimmy in between the top cover and the base and slide it along the edge of the laptop. Repeat for the opposite edge.
[* black] Swing the upper left and upper right corners away from the screen and lift the top cover away from the laptop.