Saltar al contenido principal

Cambios al paso #4

Editado por Sarah Westberg

Edicion aprobada por Sarah Westberg

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] You will need a Phillips screwdriver and spudger for this step.
[* black] Remove the center screw near the battery slot.
[* black] Open the lid of the laptop and set it on its side. Insert a the spudgerspudger into the same hole the screw was removed from.
[* black] Push the spudger inward until the keyboard is disengaged. Once disengaged, flip the laptop upright.
[* black] Open the lid of the laptop and set it on its side. Insert a the spudgerspudger into the same hole the screw was removed from.
[* black] Push the spudger inward until the keyboard is disengaged. Once disengaged, flip the laptop upright.