Saltar al contenido principal

Cambios a Paso #2

Editado por Adrian Nelson

Edicion aprobada por Adrian Nelson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Insert the flathead screwdriver into the seam on the back plate of the laptop.
[* red] Insert the flathead screwdriver into the seam on the back plate of the laptop.
[* red] Pry the back plate up.
[* black] Slide the screwdriver around the laptopslaptop's edge slowly popping off the clips securing it to the laptop.
[* black] Slide the screwdriver around the laptopslaptop's edge slowly popping off the clips securing it to the laptop.