Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #7

Editado por Geoff

Edicion aprobada por Geoff

Antes
Después
Sin cambios

Líneas de Paso

[* green] Pull the cover of the brush clutch belt out towards you.
[* black] Remove the belt from the brush clutch axle by pulling it to your right.
[* icon_reminder] To reassemble your vacuum, pull the belt with your finger towards the axle. (Using a screwdriver, or a similar device, will delay access to the axle.)

Imagen 2

Ninguna imagen anterior

Añadido