Repara tus cosas Derecho a reparar Tienda

Cambios al paso #6

Editado por Dorothy Wilhelm —

Edicion aprobada por Dorothy Wilhelm

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the three T15 torx screws that secure the cover to the brush clutch belt.
[* green] Assuming you are facing the vacuum, pullPull the cover of the brush clutch belt out towards you.
[* green] Assuming you are facing the vacuum, pullPull the cover of the brush clutch belt out towards you.
[* black] Remove the belt from the brush clutch axle by pulling it to your right.
[* icon_reminder] To reassemble your vacuum, pull the belt with your finger towards the axle. (Using a screwdriver, or a similar device, will delay access to the axle.)