Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #6

Editado por Andrea —

Edicion aprobada por Andrea

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the three T15 torx screws that secure the cover to the brush clutch belt.
[* green] Assuming you are facing the vacuum, pull the cover of the brush clutch belt out towards you.
[* black] Remove the belt from the brush clutch axle by pushingpulling it towards the gap to your right.
[* black] Remove the belt from the brush clutch axle by pushingpulling it towards the gap to your right.
[* icon_reminder] When reassembling your vacuum, pull the belt with your finger towards the axle. Using a screwdriver, or similar device, will impede access to the axle.