Repara tus cosas Derecho a reparar Tienda

Cambios al paso #6

Editado por Hoang —

Edicion aprobada por Hoang

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the three T15 torx screws that secure the cover to the brush clutch belt.
[* green] Pull the cover of the brush clutch belt outwards (towards you) asout towards you faceassuming you are facing the vacuum.
[* green] Pull the cover of the brush clutch belt outwards (towards you) asout towards you faceassuming you are facing the vacuum.
[* black] Remove the belt from the brush clutch axel by pushing it towards the gap to its left.
[* icon_reminder] When reassembling your vacuum, pull the belt with your finger towards the axel. Using a screwdriver, or similar device, will impede access to the axel.