Cambios al paso #6
Editado por Donald Percivalle —
Edicion aprobada por Donald Percivalle
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Remove the three T15 torque screws that scure the cover to the brush clutch belt. |
| [* black] Remove the cover of the brush clutch belt by pulling the cover outward, directly towards your body as you face the vacuum. |
| [* black] Remove the belt from the brush clutch axel by pushing it towards the gap to its left. |
| [* icon_reminder] When reassembling your vacuum, pull the belt with your finger towards the axel. Using a screw-driver, or similar device, will impede access to the axel and prove overly-difficult and frustrating. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido