Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #13

Editado por Geoff —

Edicion aprobada por Geoff

Antes
Después
Sin cambios

Líneas de Paso

[* red] Release the motor assembly from its housing by strongly hitting the brush clutch axle with a hammer.
[* icon_note] The rubber grommets covering the motor may be greasy.
[* greenicon_caution] Do not pull the motor completely out of the housing. The motor is connected to the vacuum by two wires.
[* greenicon_caution] Do not pull the motor completely out of the housing. The motor is connected to the vacuum by two wires.
[* black] Slowly take the motor out of the housing.

Imagen 3

Versión Antigua

Nueva Versión