Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #13

Editado por Dorothy Wilhelm

Edicion aprobada por Dorothy Wilhelm

Antes
Después
Sin cambios

Líneas de Paso

[* blackred] Release the motor assembly from its housing by strongly hitting the brush clutch axle with a hammer.
[* blackred] Release the motor assembly from its housing by strongly hitting the brush clutch axle with a hammer.
[* icon_note] The rubber grommets covering the motor will probably be greasy.
[* icon_cautiongreen] Do not pull the motor completely out of the housing. The motor is connected to the vacuum by two wires.
[* icon_cautiongreen] Do not pull the motor completely out of the housing. The motor is connected to the vacuum by two wires.
[* black] Slowly take the motor out of the housing.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión