Saltar al contenido principal
Repara tus cosas
Derecho a reparar
Tienda
Volver
Volver
Cambios al paso #9
Editado por
Geoff
—
mar 12 nov 2013 22:10:59
Edicion aprobada por
Geoff
Antes
Después
Sin cambios
Líneas de Paso
[* red] Remove the four T15 torx screws that secure the motor housing to the vacuum.
[* black] Remove the elbow-bend pipe on the right-side of the vacuum.
[*
[*
green]
By doing this, press
Press
the two release latches on either side of the elbow-bend pipe. Pull it out and away from the vacuum.
[*
[*
green]
By doing this, press
Press
the two release latches on either side of the elbow-bend pipe. Pull it out and away from the vacuum.