Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por Andrea

Edicion aprobada por Andrea

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the four T15 torx screws that secure the motor housing to the vacuum.
[* black] Then, removeRemove the elbow-bend pipe on the right-side of the vacuum. Press
[* black] By doing this, press
the two release latches on either side of it, and pullingthe elbow-bend pipe. Then, pull it out,out and away from you and the vacuum. Press two release latches on either side of the elbow bend pipe on the right side of the vacuum. Pull it out.
[* black] Then, removeRemove the elbow-bend pipe on the right-side of the vacuum. Press
[* black] By doing this, press
the two release latches on either side of it, and pullingthe elbow-bend pipe. Then, pull it out,out and away from you and the vacuum. Press two release latches on either side of the elbow bend pipe on the right side of the vacuum. Pull it out.