Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por Geoff

Edicion aprobada por Geoff

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the four T15 torx screws that secure the motor housing to the vacuum.
[* black] Then, remove the elbow-bend pipe on the right-side of the vacuum. Press the two release latches on either side of it, and pulling it out, away from you and the vacuum. Press two release latches on either side of the elbow bend pipe on the right side of the vacuum. Pull it out.
[* black] Then, remove the elbow-bend pipe on the right-side of the vacuum. Press the two release latches on either side of it, and pulling it out, away from you and the vacuum. Press two release latches on either side of the elbow bend pipe on the right side of the vacuum. Pull it out.