Repara tus cosas Derecho a reparar Tienda

Cambios al paso #9

Editado por Andrea —

Edicion aprobada por Andrea

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the four T15 torx screws that secure the motor housing to the vacuum.
[* black] Remove the elbow-bend pipe on the right-side of the vacuum.
[* blackgreen] By doing this, press the two release latches on either side of the elbow-bend pipe. Then, pull it out and away from the vacuum.
[* blackgreen] By doing this, press the two release latches on either side of the elbow-bend pipe. Then, pull it out and away from the vacuum.

Imagen 2

Versión Antigua

Nueva Versión