Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #8

Editado por Geoff

Edicion aprobada por Geoff

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using a flat-head screw driver, removeInsert flathead screwdriver into the two locking rings that secure the entire bottom-assembly of the vacuum to remove the rest of the unit. Remove the two locking rings that secure the bottom-assembly of the vacuum to the rest of the unit with a flat head screwdriverrings.
[* black] Using a flat-head screw driver, removeInsert flathead screwdriver into the two locking rings that secure the entire bottom-assembly of the vacuum to remove the rest of the unit. Remove the two locking rings that secure the bottom-assembly of the vacuum to the rest of the unit with a flat head screwdriverrings.
[* black] These rings are located just above the wheels on each side.
[* black] These rings secure the bottom assembly of the vacuum to the rest of the unit.