Saltar al contenido principal

Cambios al paso #4

Editado por Ron Davis

Edicion aprobada por Ron Davis

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] When disconnecting any wire connection do not pull by wires. Pulling the wires could damage your vacuum.
- [* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.
- [* icon_reminder] The terminals will only fit one way when reassembling, i.e., only one of the terminal wires is long enough to reach the far terminal of the switch.
+[* black] Holding them by their white plastic coverings, firmly pull the two wires from the power switch.
+ [* icon_caution] Be sure to grip the wires from their attached connectors. Pulling directly on the wires could damage your vacuum.
+ [* icon_reminder] The terminals will only fit one way during reassembly. Only one of the wires is long enough to reach the far terminal of the switch.