Saltar al contenido principal

Cambios al paso #4

Editado por Zachary

Edicion aprobada por Zachary

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.
+[* icon_caution] When disconnecting any wire connection do not pull by wires. Pulling the wires could damage your vacuum.
+ [* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.
[* icon_reminder] The terminals will only fit one way when reassembling, i.e., only one of the terminal wires is long enough to reach the far terminal of the switch.