Saltar al contenido principal

Cambios al paso #4

Editado por Donald Percivalle

Edicion aprobada por Donald Percivalle

Sin cambios

Líneas de Paso

-[* black] Locate the two purple buttons on the side of the vacuum handle.
-[* black] Pinch the two buttons inward and pull the telescopic wand assembly up to remove it from the vacuum body, revealing the back of the handle assembly.
+[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.
+ [* icon_reminder] The terminals will only fit one way when reassembling, i.e., only one of the terminal wires is long enough to reach the far terminal of the switch.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2