Saltar al contenido principal

Cambios al paso #1

Editado por Ron Davis

Edicion aprobada por Ron Davis

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_note] Start with your Dyson DC14 unplugged, standing upright and facing towards you. Remove the canister and set it aside.
-[* red] After removing the telescopic, vacuum wand, remove the two T15 torx screws securing the front cover of the neck of the vacuum.
+[* icon_note] Start with your Dyson DC14 unplugged, standing upright and facing towards you.
+[* black] Remove the canister from the vacuum.
+[* black] Disconnect the telescopic vacuum wand.
+[* red] Remove the two T15 Torx screws securing the switch cover to the vacuum.