Cambios al paso #1
Editado por Marty Rippens —
Edicion aprobada por Marty Rippens
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Locate the 1.5 x 7mm |
|---|---|
| + | [* red] Locate the 1.5 x 7mm Phillips #00 screw at the bottom right of the keyboard housing. |
| [* red] Remove this screw. Note that this is the only 1.5x7 mm screw in the entire laptop, so it is very important to keep track of it. | |
| [* black] Place a screwdriver or other firm tool with a fine tip inside the hole to the left of the screw hole. Push all the way to the left to unlock the slide. | |
| [* icon_note] It will take a good bit of force to move the slide, as it unlocks a series of clips underneath the trackpad plate. |