| - | [* black] With the keyboard removed, you will see a 1.5 x 7mm, PH00 screw at the bottom right of the keyboard housing. This screw locks into place the slide seen to the left. |
|---|
| - | [* black] Unscrew this screw fully, and set it on the side. Note that this is the only 1.5x7 mm screw in the entire laptop, so it is very important to keep track of it. |
|---|
| - | [* black] Place a screwdriver or other firm tool with a fine tip inside the hole at the other end of the slide. Pushing this to the left to unlock the slide will take a good bit of force as it unlocks a series of clips underneath the trackpad plate. Make sure the slide is fully to the left in the "unlocked" position. |
|---|
| + | [* red] Locate the 1.5 x 7mm PH00 screw at the bottom right of the keyboard housing. |
|---|
| + | [* red] Remove this screw. Note that this is the only 1.5x7 mm screw in the entire laptop, so it is very important to keep track of it. |
|---|
| + | [* black] Place a screwdriver or other firm tool with a fine tip inside the hole to the left of the screw hole. Push all the way to the left to unlock the slide. |
|---|
| + | [* icon_note] It will take a good bit of force to move the slide, as it unlocks a series of clips underneath the trackpad plate. |
|---|