Cambios al paso #1
Editado por Robert Ohling —
Edicion aprobada por Robert Ohling
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] With the keyboard removed, you will see a 1.5 x 7mm, PH00 screw at the bottom right of the keyboard housing. This screw locks into place the slide seen to the left. | |
| [* black] Unscrew this screw fully, and set it on the side. Note that this is the only 1.5x7 mm screw in the entire laptop, so it is very important to keep track of it. | |
| - | [* black] |
| + | [* black] Place a screwdriver or other firm tool with a fine tip inside the hole at the other end of the slide. Pushing this to the left to unlock the slide will take a good bit of force as it unlocks a series of clips underneath the trackpad plate. Make sure the slide is fully to the left in the "unlocked" position. |