Saltar al contenido principal

Cambios al paso #1

Editado por James Woitas

Edicion aprobada por James Woitas

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] With the keyboard removed, you will see a screw at the bottom right of the keyboard housing. This screw locks into place the slide seen to the left.
+[* black] Unscrew this screw fully, and set it on the side. Note that this is the only _______ screw in the entire laptop, so it is very important to keep track of it.
+[* black] Now place a screwdriver or other firm tool with a fine tip inside the hole at the other end of the slide. Pushing this to the left to unlock the slide will take a good bit of force as it unlocks a series of clips underneath the trackpad plate. Make sure the slide is fully to the left in the "unlocked" position.