Saltar al contenido principal

Cambios a Paso #1

Editado por David Albarran-Martinez

Edicion aprobada por David Albarran-Martinez

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the three Phillips 2.8 mm2.8mm screws at the marked places with a JIS #000 screwdriver.
[* icon_note] The screw on the back of the ultrasonic sensor is covered by the foam.
[* red] Remove the three Phillips 2.8 mm2.8mm screws at the marked places with a JIS #000 screwdriver.
[* icon_note] The screw on the back of the ultrasonic sensor is covered by the foam.